Go to the Home Page - IECI Logo

Interworld Electronics

 
and Computer Industries Inc.         
Interworld Electronics Home Page
 Home   Data Acquisition   Pico   Product
Picoscope 9000
PicoScope 5000
PicoScope 3000
PicoScope 2000
ADC-200-100 
ADC-40/42/and ADC-100 
ADC-20 and ADC-24
ADC-212 and ADC-216  Precision PC Based Oscilloscope
USB Pen Scope
Software Options for the ADC-200
Palm to ADC-16 (Application Note)
Temperature & Humidity 
High Speed High Resolution ADC-212
DrDaq Low Cost Data Acquisition 
Automotive Products
Demo Software and Upgrades
Enviro Mon Data Logger for  temperature etc.
DrDaq Low Cost Data Acquisition 
PicoLog  Logging Software
Press Releases 
Technical tips
PicoScope 6 Video Demo

PicoScope 3000 Oscilloscope

 Converts PC to Oscilloscope (1435 bytes)

   
Specifications


US Prices
CDN Prices

Privacy and Security

 

The PicoScope 3000 range of PC oscilloscopes offer a level of performance that exceeds any other PC oscilloscope currently manufactured by Pico or our competitors.

Oscilloscope Specifications

PicoScope 3204 3205 3206
Bandwidth 50 MHz 100 MHz 200 MHz
Sampling rate
(repetitive signals)		 2.5 GS/s 5 GS/s 10 GS/s
Sampling rate
(single shot)		 50 MS/s 100 MS/s 200 MS/s (single channel)
100 MS/s (dual channel)
Channels 2 + Ext trigger
Oscilloscope timebases 5 ns/div to 50 s/div 2 ns/div to 50 s/div 1 ns/div to 50 s/div
Timebase accuracy 50 ppm 50 ppm 50 ppm
Spectrum ranges 0 to 25 MHz 0 to 50 MHz 0 to 100 MHz
Dynamic range 50 dB
Signal generator Fixed 1 KHz square wave Fixed amplitude, Variable frequency sine/square/triangle wave with single/dual slope sweep options.
Maximum frequency 1 MHz.
Trigger modes Free Run, Auto, Repeat, Single and Save To Disk On Trigger
Pre/post trigger -100% to +100%
Buffer size 256 KB 512 KB 1 MB
Resolution 8 bits
Accuracy ±3%
Ranges 10 mV to 2 V/div
Input impedance 1 MΩ
Overload protection ±100 V (signal input)
±30 V (signal generator / external trigger)
±50 V (between grounds)
PC connection USB 2.0 (USB 1.1 compatible)
Power supply from USB port*
Dimensions 140 x 190 x 45 mm
Supplied software PicoScope (oscilloscope, spectrum analyzer, meter), PicoLog (data logger), Driver and examples (C, Delphi and Visual Basic, Labview, Agilent VEE6.1 and Excel.)
Software is supplied on CD and is compatible with Windows 98SE/ME/2000/XP

* In normal operation the PicoScope 320x is powered either from a USB port on your computer or from a powered hub. It is not possible to power this device from an un-powered USB hub. If both the PC and the device under test are referenced to the same ground (earth) then noise/offset problems may occur. This problem is only likely to occur when using a mains powered desktop PC whilst measuring DC coupled (earth referenced) signals of a small amplitude. If this situation occurs a mains power adaptor (supplied) will have to be used to power the unit.

Pico 3224 Information - 12 Bit 2 Channel USB Scope

PICO 3425 Information - 12 Bit 4 Channel Differential Input Scope

Labview Examples and 3000 DLL

PicoScope oscilloscope software > 

Pico Scope Kits

Updated: 10/06/2008
Put Links and images as needed here

Return to top of page
 USA Office: Tel: 1-877-902-2979    Fax: 1-877-FAX-IECI     Pacific  Time Zone    
                   Tel:1-425-223-4311    Fax: 1-425-223-4303     Pacific Time Zone
P.O. Box 1280. Street Address: 145 Tyee Drive, Point Roberts, WA 98281

Sales inquiries to:  sales at interworldusa.com  Support & Service: support at interworldusa.com

Western Canada: - Vancouver, B.C. Tel: 1-(604) 925-6150    Fax: 1-(604) 925-6170 Toll Free:1-(800) 663-6001
    2454 Haywood Ave, West Vancouver, B.C. V7V 1Y1
  Eastern Canada: - Markham, Ontario Tel: 1-(905) 513-7027    Fax: 1-(905) 513-7029 Toll Free:1-(800) 465-0164
3555 14th Ave, Unit 12, Markham, Ontario L3R 0H5

Sales inquiries to:  sales at interworld.ca    Support & Service: support at interworld.ca

To visit our Australian web site, please click here.